Local Wi-Fi and network installation in New York
What a network installation should include
A local installer should do more than mount a router. In New York, plaster, masonry and tall, narrow layouts decide how a network behaves, so the design comes first.
- A survey of the building, the internet service entrance and the devices to be supported
- Access point locations and a cable plan, with every run returning to one equipment location
- Cable with the correct listed rating for each route, labeled at both ends
- A router, switches and access points configured with separate networks for staff, guests, cameras and devices
- Testing of each run and of coverage, followed by a handover with documentation and administrator access
Homes, businesses and industrial sites
| Site | Common priorities | Typical scope |
|---|---|---|
| Homes and apartments | Coverage on every floor, an affordable scope, quiet equipment and simple management | Wired access points where cable can be run, mesh where it cannot, and a small network closet |
| Offices, shops, clinics and hospitality | Separate staff and guest networks, payment and record systems, cameras, door access and phones | Structured cabling, managed switches, a firewall, battery backup and remote monitoring |
| Warehouses, logistics and industrial sites | Large open areas, scanners and sensors, long distances, dust and temperature | Outdoor or industrial-rated equipment, fiber or wireless links between areas, and separate networks for devices |
Wireless backhaul between buildings
Where trenching or a new circuit is impractical, a point-to-point wireless link can connect two buildings or bring service to a remote area. It needs a clear line of sight, stable mounting points and permission to use the roof or wall. We commonly use Ubiquiti's airMAX and airFiber lines for these links.
The design covers distance, the expected speed, weather margin and interference. Links use either unlicensed bands or, for some long or critical paths, frequencies licensed by the FCC (opens an external site). A survey of the actual path decides whether a link is suitable.
Redundancy and integration
- Internet: a second connection from a different provider or cellular failover, with automatic switching.
- Power: battery backup for the network equipment, sized to how long it must stay up, and standby power where the site requires it.
- Equipment: redundant links between switches and spare hardware for critical sites.
- Storage: network storage and tested backups, with a copy kept off site.
- Integration: cameras, door access, phones, building systems and industrial IoT devices on one planned network, each separated as its risk requires.
- Business systems: connections that other systems depend on, such as medical office and pharmacy systems, planned around their uptime needs.
From our projects
We've built and designed networks for residential, commercial and industrial clients, both wired and wireless, including wireless backhaul. We can design around a client's unique requirements, such as integration and redundant backups.
We frequently work with UniFi products in access control, Wi-Fi and wireless backhaul, physical security, storage and networking. We also work with industrial IoT devices, and our pharmacy experience includes optimizing EDI systems.
We have the capability to serve commercial clients and we keep the work affordable for residential clients as well.
Choosing equipment
We frequently work with UniFi products across Wi-Fi, wireless backhaul, access control, physical security, storage and networking. One platform can simplify management, and it suits many homes and businesses. It is not the answer to every requirement, so the design starts from the site, and equipment follows from it.
Local control is worth considering as well. Our guide to local-control smart devices covers why it matters for systems that should keep working without a cloud service.
What to prepare for a quote
- Floor plans or a sketch, and the type of walls and ceilings
- The number of users and devices, including cameras, phones and any industrial devices
- Your current internet provider and where service enters the building
- What must keep working during an internet or power outage
- Any systems the network must integrate with, and any building rules on roof or riser access
Low-voltage installation is provided through our partner contractors, and any electrical circuits are installed by our licensed electrical partner.
In short
A reliable network starts with a design for the building and the way it will be used, then wired access points, a tidy equipment location and a tested handover. We design and build wired and wireless networks for homes, businesses and industrial sites in New York, including wireless backhaul between buildings, redundant internet and power, and integration with cameras, access control, storage and industrial devices. We frequently work with UniFi products, and the scope can be sized to a single home or a multi-building site.
Frequently asked questions
Do you install Wi-Fi in a single home or apartment?
Yes. Residential work is scoped to the home, from a few wired access points to a full network closet during a renovation. Co-op and condominium rules may affect where cable can run.
Can you connect two buildings without trenching?
Often, with a point-to-point wireless link, if there is a clear line of sight and permission for the mounting points. A survey of the path confirms whether it is suitable.
Do you work with UniFi?
Yes, we frequently work with UniFi products for wireless, backhaul, access control, physical security, storage and networking. The equipment is chosen to suit each site.
Can the network stay up during an outage?
It can be designed with a second internet connection or cellular failover and with battery backup. How long it stays up depends on the design and on what the building's power and service providers do during the outage.
Sources
1 sources
- 47 CFR Part 101: Fixed Microwave Services (opens an external site)Electronic Code of Federal Regulations
This guide reflects our experience and our interpretation of the rules as of the date it was published or last updated. Regulations, codes, incentives and the way agencies enforce them change often, and our interpretation may be incomplete or wrong. It is general information, not legal, engineering, tax or financial advice. Consult the relevant agency and a licensed professional before you plan, purchase or begin any work. Reading this guide does not make you our client and does not create any contractor, consulting or advisory relationship. Outstanding Construction Inc is not liable for any loss arising from the use of or reliance on this content, and is responsible only for work performed under a written contract signed with us.